Description
Flow Rate Characteristics
Materials of Construction
| Filter Medium | Hydropobic PTFE Membrane |
| Support layer | Polypropylene |
| Core/Cage/End Caps | Polypropylene |
| 0-Rings | Please refer to ordering information |
| Effective Filtration Area | 0.74-0.96 m / ϕ68-1 0 inch |
Operating Conditions
| Max. Operating Temperature | 90°C |
| Max. Differential Pressure | 4 bar / 21°C |
| 2.1 bar / 80°C | |
| Steaming Sterilize(Autoclave) | 121°C / 30min |
Quality and Biological Safety
- 100% integrity tested
- Meets USP Biological Reactivity Test , in vivo, for Class Vl-121°C
- Plastics
- Every filter tested during manufacture. Test correlated to microbial retention
- Bacterial Endotoxins (< 0.25 EU/ml)
- Extractables < 30mg per 10 inch
- Certificate of Test provided includes:
- Fabrication Integrity
- Bacterial Retention
- Effluent quality for cleanliness. TOG and Water Conductivity, pH and Pyrogens
Nonvolatile Residue (NVR) Extractable
Integrity Testing Parameters
| Bubble Point (0.221Jm) | ≥1100 mbar in alcohol or with 60140 % IPNwater @20°C |
| Diffusion Flow (0.221Jm) | ≤16ml/min/10” cartridge @ 800mbar@20°C |
| WFT(0.221Jm) | ≤0.38ml/min/10″ cartridge @2500mbar |
Ordering Information
| Removal Ratings | End Cap | Nominal Length | Seal Material |
| 0002=0.02μm | DOE=Double Open End | 05=5″ | S =Silicone |
| 0005=0.05μm | HTC=222 /Flat (PBT Insert) | 10=10″ | E =EPDM |
| 0010=0.1μm | HTF=222 /Fin (PBT Insert) | 20=20” | V =Viton |
| 0022=0.22μm | HSF=226 /Fin (PST Insert) | 30=30” |
